Help identifying Wells Gardner Chassis’ss’s<\/a><\/p>\nThat first link makes clear that both of mine are K7000 models (not K7400 or K7500), because of the distinctive power resistor hanging off the aluminium frame. Both of mine came with 63cm (25 inch) CRTs.<\/p>\n
Unit 2 – S\/N 986798<\/h4>\n
This was picked up on Facebook (as a freebie) in October 2025. It was in original (but filthy) condition, with matching serial numbers on the main PCB, CRT and mounting frame. The tube appears to have virtually no visible burn-in. The tube model number is RCA A63ADT10X05.<\/p>\n
It has a satellite board that houses most (but not all) of the video controls.<\/p>\n
The above photos show its condition after a thorough clean, including putting the PCBs through the dish washer and then being thoroughly dried with compressed air.<\/p>\n
I can’t see many distinctive markings on the main PCB, except for “P538″and “”0216-001E”on the silk screen, and “5357P-007″on the bottom copper layer.<\/p>\n","protected":false},"excerpt":{"rendered":"
This page has my notes on the Wells Gardner K7000 Monitor Chassis, which I have 2 of. Here is a good guide to identify different WG chassis -> How to tell the difference between u2000, u5000, k7400 and k7500 monitor chassis. This page also has some good information about the K7000, including links to other ..<\/p>\n
<\/div>\n
Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-16352","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P7xTsk-4fK","jetpack-related-posts":[{"id":2393,"url":"https:\/\/avitech.com.au\/?page_id=2393","url_meta":{"origin":16352,"position":0},"title":"DEC BA23 Chassis","author":"malcolm","date":"18-July-2017","format":false,"excerpt":"These are my rough notes regarding the DEC BA23 chassis. The BA23 houses the H9278A backplane. On the back of the H9278A there is a BA23-A breakout board for RQDXn-series controllers. I've not been able to locate any schematics for the BA23 enclosure. The following manuals have useful information about\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=700%2C400 2x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=1050%2C600 3x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/07\/20170718_201346-Large.jpg?resize=1400%2C800 4x"},"classes":[]},{"id":3713,"url":"https:\/\/avitech.com.au\/?page_id=3713","url_meta":{"origin":16352,"position":1},"title":"DEC PDP-11\/23 in BA11-N Chassis","author":"malcolm","date":"29-November-2019","format":false,"excerpt":"Backplane Configuration The table below shows how the H9273-A backplane is currently populated. A B C D M8186 (11\/23 Processor) Empty M8047 (MXV11-A) Empty M8044 (64KB RAM) Empty M8013 (RLV11) M8014 (RLV11) Empty Empty Empty Current configuration This is a basic 11\/23 capable of booting RT-11 V5.3 from a TU58\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=700%2C400 2x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=1050%2C600 3x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2019\/11\/IMG_20191129_220312.jpg?resize=1400%2C800 4x"},"classes":[]},{"id":1664,"url":"https:\/\/avitech.com.au\/?page_id=1664","url_meta":{"origin":16352,"position":2},"title":"QBUS Notes","author":"malcolm","date":"1-February-2017","format":false,"excerpt":"This page captures my rough working notes regarding QBUS systems. You probably won't find anything greatly useful here. It is mainly a place for me to records things that I seem to continually forget the details of! BA11-NC Chassis This is a 9 row 18-bit ABCD chassis. So dual-height cards\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":5670,"url":"https:\/\/avitech.com.au\/?page_id=5670","url_meta":{"origin":16352,"position":3},"title":"DEC PDP-8\/e H960","author":"malcolm","date":"16-May-2022","format":false,"excerpt":"Below are photos of my PDP-8\/e in a H960 rack. The chassis and paper-tape reader\/punch are not shown in these photos as they are currently stored separately.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=700%2C400 2x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=1050%2C600 3x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2022\/05\/PXL_20220504_002605429.jpg?resize=1400%2C800 4x"},"classes":[]},{"id":1468,"url":"https:\/\/avitech.com.au\/?page_id=1468","url_meta":{"origin":16352,"position":4},"title":"Pertec T8640A Tape Transport","author":"malcolm","date":"3-January-2017","format":false,"excerpt":"I have a Pertec T8640A Tape Transport that is now working nicely on a QBUS PDP-11 system. While I still have a lot to learn about the operation of magtape systems (and their advantages and limitations), I am now able to successfully \"INItialize\", write to and read from magtapes in\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/01\/20170105_093142-Large-e1483572635195.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/01\/20170105_093142-Large-e1483572635195.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/01\/20170105_093142-Large-e1483572635195.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/01\/20170105_093142-Large-e1483572635195.jpg?resize=700%2C400 2x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2017\/01\/20170105_093142-Large-e1483572635195.jpg?resize=1050%2C600 3x"},"classes":[]},{"id":903,"url":"https:\/\/avitech.com.au\/?page_id=903","url_meta":{"origin":16352,"position":5},"title":"PDP-11\/34 decdatasystem","author":"malcolm","date":"25-July-2016","format":false,"excerpt":"In my collection I have a blue-and-white \"decdatasystem\" consisting of a TU10W drive and an RK07 drive. I decided to investigate these a little further last weekend, and unexpectedly found that below the TU10W is an entire PDP-11\/34 chassis with programmers panel and interfaces for the TU10W and RK07. Here\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2016\/07\/decdatasystem-front-1.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2016\/07\/decdatasystem-front-1.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2016\/07\/decdatasystem-front-1.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/avitech.com.au\/wp-content\/uploads\/2016\/07\/decdatasystem-front-1.jpg?resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/pages\/16352","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/avitech.com.au\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=16352"}],"version-history":[{"count":3,"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/pages\/16352\/revisions"}],"predecessor-version":[{"id":16356,"href":"https:\/\/avitech.com.au\/index.php?rest_route=\/wp\/v2\/pages\/16352\/revisions\/16356"}],"wp:attachment":[{"href":"https:\/\/avitech.com.au\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=16352"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}